Jaklee Posted August 8, 2021 Share Posted August 8, 2021 Thank you for your efforts. Do you have an EPSON L1800? yavuzberber@gmail.com Quote Link to comment Share on other sites More sharing options...
comradevn7 Posted August 16, 2021 Share Posted August 16, 2021 On 3/21/2021 at 3:56 AM, Mr.Carter said: Guys , I have developed emulators for epson L800,L805 printer , most of models works directly for uv/dtg printer very few modifications is required because they have separate motor for all the task we just have to emulate PE, but epson l805,l800 have single motor which drives APG,PE,PW,PAPER_FEED,CLEANING_PUMP,HEAD_LOCKING And to make it flatbed we have to remove/cut that Paperfeed rod which is used to translate movement to APG,CLEANING_PUMP, HEAD_LOCKING And thats make it difficult to convert it into flatbed but now it is possible... pf-encoder will be seperate and arduino will provide all the sensor signal to epson, Also for HEAD_LOCKING there is servo liver which will lock print head and open/close same as capping unit's liver opens/closes If Anyone is interested i will provide it for free(only for non commercial use) as it will be useful for someone to buit their own epson L805,L800 flatbed Sir,please send me to : comradevn7@gmail.com. Thanks alot Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted August 16, 2021 Author Share Posted August 16, 2021 Sent to all Quote Link to comment Share on other sites More sharing options...
chabar Posted August 20, 2021 Share Posted August 20, 2021 Thank you for your efforts. chabar1000@gmail.com Quote Link to comment Share on other sites More sharing options...
johanratoto Posted August 22, 2021 Share Posted August 22, 2021 muchas gracias. me lo podrías enviar joratoto@hotmail.com Quote Link to comment Share on other sites More sharing options...
READ Posted August 28, 2021 Share Posted August 28, 2021 can you share it with me read60a@gmail.com Quote Link to comment Share on other sites More sharing options...
TranChung Posted August 29, 2021 Share Posted August 29, 2021 tranvanchung2502@gmail.com could you pls send to me. Thanks Sir! Quote Link to comment Share on other sites More sharing options...
arapid@aol.com Posted August 29, 2021 Share Posted August 29, 2021 Mr. Carter, would you kind enough send me the code, I try to work on 1430 thanks arapid@aol.com Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted August 30, 2021 Author Share Posted August 30, 2021 6 hours ago, arapid@aol.com said: Mr. Carter, would you kind enough send me the code, I try to work on 1430 thanks arapid@aol.com Code already available for 1430 at open dtg forum, this is for models like l800,l805,r290 Quote Link to comment Share on other sites More sharing options...
TranChung Posted August 30, 2021 Share Posted August 30, 2021 sir.Carter. Could you pls post your result L800 dtg here Some pictures for everyone to learn. Thanks Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted August 30, 2021 Author Share Posted August 30, 2021 59 minutes ago, TranChung said: sir.Carter. Could you pls post your result L800 dtg here Some pictures for everyone to learn. Thanks Quote Link to comment Share on other sites More sharing options...
David Posted September 16, 2021 Share Posted September 16, 2021 send me email please for writing.. Quote Link to comment Share on other sites More sharing options...
maoli Posted September 20, 2021 Share Posted September 20, 2021 Thank you for your efforts. 394511647@qq.com Quote Link to comment Share on other sites More sharing options...
Florensik Posted September 21, 2021 Share Posted September 21, 2021 Mr.Carter pls sent me too. Thanks a lot! florensik81@outlook.de Quote Link to comment Share on other sites More sharing options...
Toma996 Posted September 25, 2021 Share Posted September 25, 2021 I am having problems with PW sensor how did u simulate it? I would like to look at your design maybe it will help. yu7tom@gmail.com Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted September 26, 2021 Author Share Posted September 26, 2021 Sent to all Quote Link to comment Share on other sites More sharing options...
Toma996 Posted September 26, 2021 Share Posted September 26, 2021 I didnt fuly understand the code. Could you tell me if the pw sensors checks the side of the paper or just the begining? Do i need to know both the paper position and head position to emulete pw? I am making my own printer and its nearly done, i can print on low res then it does not check pw VID_20210918_203154.mp4 Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted September 26, 2021 Author Share Posted September 26, 2021 (edited) 35 minutes ago, Toma996 said: I didnt fuly understand the code. Could you tell me if the pw sensors checks the side of the paper or just the begining? Do i need to know both the paper position and head position to emulete pw? I am making my own printer and its nearly done, i can print on low res then it does not check pw VID_20210918_203154.mp4 It checks the position of paper to start printing from the edge you can remove sensor from bottom of the head carriage and emulate it as the images and diagram shows which i have sent to you Edited September 26, 2021 by Mr.Carter Quote Link to comment Share on other sites More sharing options...
uhim Posted September 26, 2021 Share Posted September 26, 2021 uhim.ua@gmail.com Thank! Quote Link to comment Share on other sites More sharing options...
uhim Posted September 26, 2021 Share Posted September 26, 2021 Thank you, I received the code, I will understand. Quote Link to comment Share on other sites More sharing options...
Gusterev Posted October 6, 2021 Share Posted October 6, 2021 Gusterev@mail.ru Thank! Quote Link to comment Share on other sites More sharing options...
moss2016 Posted October 12, 2021 Share Posted October 12, 2021 hi,please send to me too.thanks t.moselekatsi@gmail.com Quote Link to comment Share on other sites More sharing options...
anum11 Posted October 12, 2021 Share Posted October 12, 2021 Hello, May i have the code too, umutt4n@hotmail.com Quote Link to comment Share on other sites More sharing options...
josualo Posted October 15, 2021 Share Posted October 15, 2021 hello, Thank you for your contribution, could you send it to me jgnune@hotmail.es. I was currently modifying an epson r265 with uv light and dampers, it is working with paper but, I wanted to put it with a flat bed and I think it is the same base as the l805 that I have for sublimation. Quote Link to comment Share on other sites More sharing options...
Mr.Carter Posted October 16, 2021 Author Share Posted October 16, 2021 Those who has completed their build post a printing video here Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.